Instructions for use:
A. Flash firmware for DOS mode:
* IDE interface
Drive: Before Flash Procedure, please make sure
the following:
1. Build a boot disk (floppy) on Windows 98.
2. Unzip the firmware to the other one floppy
disk.
3. Boot to DOS mode, and change the firmware
disc.
4. If connect the drive to Secondary IDE Channel
/ Master. Please type "A:> FL 3".
5. If connect the drive to Secondary IDE Channel
/ Slave. Please type "A:> FL 4".
6. When it flashes to 100%, then finish. And
restart computer.
* Warning! Flash program
can't use on DOS mode of Windows!
B. Flash firmware for Windows mode:
1. Please download the appropriate driver file
you need from this page.
2. Run the flash program under Windows.
3. Click on the Upgrade button under
the flash program
4. Status Upgrading is starting to flash
the F/W
5. After flashing, the system will appear Complete!
Please restart your computer, then, restart
your computer to finish the flash procedure.
Note:
1. PikaOne do not recommend you to upgrade your
F/W, if the drive is working properly and does
not encounter any irreclaimable problem issues.
2. PikaOne is not responsible for any defective
reasons if the upgrading process caused the
issue.
|
Speed |
Model |
Interface |
Firmware (Windows) |
CHANGE LIST |
|
Version |
Size |
X |
4X2X |
classic dvd rw interne |
IDE |
|
938 KB |
|
8X4X |
classic dvd rw interne |
IDE |
|
980 KB |
|
8X8X |
classic dvd rw interne |
IDE |
|
1.32 MB |
|
8X4X |
classic dvd rw externe |
USB 2.0 |
|
980 KB |
|
16X |
classic dvd rw externe DL |
USB 2.0 |
|
1.32 MB |
|
16X |
classic dvd rw interne DL |
IDE |
|
1.94 MB |
|
last update 21 June 05 |
LIVEUPDATE PROGRAM:
Live Updates Program is a useful and powerful
tool for the drive firmware upgrading. It can
easily and automatically detect your current
firmware and check the latest firmware from
the internet. Through this powerful tool, your
drive will remain the best quality and performance.
For LiveUpdate Program related information,
please refer to the below website:
http://www.drvupdate.com
For playback software
related information, please refer to the below
website:
CyberLink http://www.cyberlink.com
For burning software
related information, please refer to the below
website:
Ahead http://www.nero.com
